Allied Telesis AT-S62 - Manual (Page 301)

AT-S62 Management Software Web Browser Interface User’s Guide
Secton V: Virtual LANs 301
contain spaces or special characters, such as asterisks (*) or
exclamation points (!).
Note
A VLAN must be assigned a name.
7. Select Port Based as the Type. This is the default setting. This is the
correct setting when creating a port-based or tagged VLAN.
Note
The Type selection of Protected is used to create a protected ports
VLAN, as explained in Chapter 21, “Protected Ports VLANs” on
page 317.
8. To select the ports for the VLAN, click the ports in the switch image.
Clicking repeatedly on a port toggles it through the following possible
settings:
Untagged port
Tagged port
Port not a member of the VLAN
When assigning ports to a VLAN, note the following:
ˆ When you add an untagged port to a VLAN, the port is
automatically removed from its current untagged VLAN
assignment.
ˆ A untagged port set to the 802.1x authenticator or supplicant role
must be changed to the 802.1x none role before you can change
its untagged VLAN assignment. After the VLAN assignment is
made, you can return the port’s role to authenticator or supplicant,
if desired.
9. Click Apply. The new user-configured VLAN is ready for network
operations.
10. To permanently save the changes, select the Save Config menu
selection.