Allied Telesis AT-S62 - Manual (Page 202)

Chapter 18: Power Over Ethernet
202 Section II: Advanced Operations
Power Limit
The maximum amount of power allowed by the port for the device. The
default is 15,400 milliwatts (15.4 W).
Power Priority
The port priority. This can be Critical, High, or Low. The default is Low.
Power Class
The IEEE 802.3af class of the device.
Voltage
The voltage being delivered to the powered device
Current
The current drawn by the powered device.
Power Status
Whether power is being supplied to the device. Status will be one of
the following:
ON: Power is being supplied to a powered device.
OFF - Disabled by user: PoE is disabled on the port.
Off - Detection in process: PoE is enabled on the port, but the device
connected to the port is not a powered device.
4. Click Close.