Allied Telesis AT-S62 - Manual (Page 260)

Chapter 19: SNMPv3
260 Section III: SNMPv3
Displaying User
Table Entries
To display entries in the SNMPv3 User Table, perform the following
procedure.
1. From the Home Page, select Monitoring.
2. Select the Mgmt Protocols menu selection.
3. Select the SNMP Tab.
4. From the SNMP Monitoring Tab, click the circle next to View User
Table.
5. Click View at the bottom of the page.
The Monitoring, SNMPv3 User Table Page is shown in Figure 83.
Figure 83. Monitoring, SNMPv3 User Table Page