Allied Telesis AT-S62 - Manual (Page 141)

AT-S62 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 141
Priority
Defines a traffic flow by the user priority level in tagged Ethernet
frames. The range is 0 to 7.
VLAN ID
Defines a traffic flow of tagged packets by its VLAN ID number. The
range is 1 to 4094.
Protocol
Defines a traffic flow as one of the following Layer 2 protocols:
ˆ User Specified
ˆ IP
ˆ ARP
ˆ RARP
User Specified Protocol
Defines a traffic flow of a Layer 2 protocol by its protocol number. The
number can be entered in either decimal or hexadecimal format. For
the latter, precede the number with “0x”. To use this parameter, the
Protocol parameter must be set to User Specified.
TOS/DSCP
Defines a traffic flow by its Type of Service or DSCP value. To set this
parameter, the Protocol parameter must be set to IP. Options are:
ˆ TOS (Type of Service)
ˆ DSCP
TOS
Defines a traffic flow by its Type of Service value. The range is 0 to 7.
To set this value, the TOS/DSCP parameter must be set to TOS.
DSCP
Defines a traffic flow by its DSCP value. The range is 0 to 63. To set
this value, the TOS/DSCP parameter must be set to DSCP.
IP Protocol
Defines a traffic flow of a Layer 3 protocol. To set this parameter, the
Protocol variable must be set to IP. Options are:
ˆ User Specified
ˆ TCP
ˆ UDP
ˆ ICMP
ˆ IGMP