Allied Telesis AT-S62 - Manual (Page 248)

Chapter 19: SNMPv3
248 Section III: SNMPv3
v3
Select this value to process messages with the SNMPv3 protocol.
8. In the Security Model field, select one of the following SNMP protocols
as the Security Model for this Security Name, or User Name.
v1
Select this value to associate the Security Name, or User Name, with
the SNMPv1 protocol.
v2c
Select this value to associate the Security Name, or User Name, with
the SNMPv2c protocol.
v3
Select this value to associate the Security Name, or User Name, with
the SNMPv3 protocol.
9. In the Security Name field, enter a User Name that you previously
configured with the SNMPv3 User Table.
See “Creating a User Table Entry” on page 208.
10. In the Security Level field, select one of the following Security Levels:
Note
The value you configure for the Security Level must match the value
configured for the User Name in the User Table Menu. See
“Creating a User Table Entry” on page 208.
No Authentication/Privacy
This option represents neither an authentication nor privacy protocol.
Select this security level if you do not want to authenticate users and
you do not want to encrypt messages using a privacy protocol. This
security level provides the least security.
Note
If you have selected SNMPv1 or SNMPv2c as the Security Model,
you must select No Authentication/Privacy as the Security Level.
Authentication
This option represents authentication, but no privacy protocol. Select
this security level if you want to authenticate SNMP users, but you do
not want to encrypt messages using a privacy protocol.You can select
this value if you configured the Security Model parameter with the
SNMPv3 protocol.