Allied Telesis AT-S62 - Manual (Page 217)

AT-S62 Management Software Web Browser Interface User’s Guide
Section III: SNMPv3 217
the MIB tree. The value of the Subnet Mask parameter is dependent
on the subtree you select. See RFC 2575 for detailed information
about defining a subnet mask.
9. In the View Type field, enter one of the following view types:
Included
Enter this value to permit the user to see the subtree specified above.
Excluded
Enter this value to not permit the user to see the subtree specified
above.
10. In the Storage Type field, enter a storage type for this table entry:
Volatile
Select this storage type if you do not want the ability to save an entry in
the View Table to the configuration file. After making changes to a View
Table entry with a Volatile storage type, the Save Config menu
selection does not appear.
NonVolatile
Select this storage type if you want the ability to save an entry in the
View Table to the configuration file. After making changes to a View
Table entry with a NonVolatile storage type, the Save Config menu
selection appears.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the SNMPv3 View Table entry takes
effect immediately.
11. Click Apply to update the SNMPv3 View Table.
12. To save your changes, select the Save Config menu selection.