Allied Telesis AT-S62 - Manual (Page 267)

AT-S62 Management Software Web Browser Interface User’s Guide
Section III: SNMPv3 267
Displaying
SNMPv3
Community
Table Entries
To display entries in the SNMPv3 Community Table, perform the following
procedure.
1. From the Home Page, select Monitoring.
2. Select the Mgmt Protocols menu selection.
3. Select the SNMP Tab.
4. From the SNMP Monitoring Tab, click the circle next to the View
Community Table.
5. Click View at the bottom of the page.
The Monitoring, SNMPv3 Community Table Page is shown in Figure
90.
Figure 90. Monitoring, SNMPv3 Community Table Page