Allied Telesis AT-S62 - Manual (Page 163)

AT-S62 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 163
Active
Whether or not this traffic class is active on the switch. An active traffic
class is part of a policy that is assigned to one or more switch ports. An
inactive traffic class is not assigned to any policies or to policies that
are not assigned to switch ports.
Parent Policy ID
The QoS policies to which the traffic class is assigned.
Flow Group List
The flow groups assigned to this traffic class.
4. To create a new traffic class, click Create.
The Create Traffic Class page is shown in Figure 44.
Figure 44. Create Traffic Class Page
5. Configure the following parameters:
ID
Specifies an ID number for the traffic class. Each traffic class on the
switch must be assigned a unique number. The range is 0 to 511. The
default is 0. This parameter is required.
Exceed Action
Specifies the action to be taken if the traffic of the traffic class exceeds
the maximum bandwidth, specified in option 6. There are two possible
exceed actions, drop and remark. If drop is selected, traffic exceeding
the bandwidth is discarded. If remark is selected, the packets are