Allied Telesis AT-S62 - Manual (Page 35)

AT-S62 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 35
Note
This procedure describes the parameters in the Administration
section of the tab. The Passwords section is described in
“Configuring the Manager and Operator Passwords” on page 42.
The DHCP/BOOTP options are described in “Activating the BOOTP
or DHCP Client Software” on page 38.
Note
The Defaults button returns all parameters in this tab to their default
settings. The Reset button resets the switch, as explained in
“Rebooting a Switch” on page 44.
4. Change the parameters as desired.
The parameters in the Administration section are described below:
System Name
This parameter specifies a name for the switch (for example, Sales
Ethernet switch). The name is displayed at the top of the AT-S62
management pages and tabs. The name can be from 1 to 39
characters. The name can include spaces and special characters,
such as exclamation points and asterisks. The default is no name. This
parameter is optional.
Note
Allied Telesyn recommends assigning each switch a name. Names
can make it easier for you to identify the various switches when you
manage them and help you avoid performing a configuration
procedure on the wrong switch.
Administrator
This parameter specifies the name of the network administrator
responsible for managing the switch. The name can be from 1 to 39
characters. It can include spaces and special characters, such as
dashes and asterisks. The default is no name. This parameter is
optional.
Comments
This parameter specifies the location of the switch, (for example, 4th
Floor - rm 402B). The location can be from 1 to 39 characters. The
location can include spaces and special characters, such as dashes
and asterisks. The default is no location. This parameter is optional.