Allied Telesis AT-S62 - Manual (Page 228)

Chapter 19: SNMPv3
228 Section III: SNMPv3
This parameter allows the users assigned to this Group Name to view
the information specified by the View Table entry. This value does not
need to be unique.
8. In the Write View Name field, enter a value that you configured with
the View Name parameter in the View Table.
This parameter allows the users assigned to this Security Group to
write, or modify, the information in the specified View Table. This value
does not need to be unique.
9. In the Notify View Name field, enter a value that you configured with
the View Name parameter in the View Table.
This parameter allows the users assigned to this Group Name to send
traps permitted in the specified View. This value does not need to be
unique.
Note
The Context Match field is a read only field. The Context Match field
is always set to Exact.
10. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an entry in
the Access Table to the configuration file. After making changes to an
Access Table entry with a Volatile storage type, the Save Config menu
selection does not appear.
NonVolatile
Select this storage type if you want the ability to save an entry in the
Access Table to the configuration file. After making changes to an
Access Table entry with a NonVolatile storage type, the Save Config
menu selection appears.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the Access Table entry takes effect
immediately.
11. Click Apply to update the SNMPv3 Access Table.
12. To save your changes, select the Save Config menu selection.