Allied Telesis AT-S62 - Manual (Page 182)

Chapter 15: Class of Service
182 Section II: Advanced Operations
Displaying QoS Queuing and Scheduling
To display QoS queuing and scheduling, do the following:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Services menu option.
3. Select the Queuing & Scheduling tab.
The upper section of the tab displays the CoS priority to egress queue
assignments. The lower half displays the egress weight settings. For
an explanation of the information in this window, refer to “Mapping CoS
Priorities to Egress Queues” on page 178 and “Configuring Egress
Scheduling” on page 180.