Allied Telesis AT-S62 - Manual (Page 339)

AT-S62 Management Software Web Browser Interface User’s Guide
Section VI: Port Security 339
server. This parameter only applies when the port is operating in the
Multiple operating mode. Possible settings are:
ˆ On: Specifies that only those supplicants with the same VLAN
assignment as the initial supplicant are authenticated. Supplicants
with a different or no VLAN assignment are denied entry to the
port. This is the default setting.
ˆ Off: Specifies that all supplicants, regardless of their assigned
VLANs, are authenticated. However, the port remains in the VLAN
specified in the initial authentication, regardless of the VLAN
assignments of subsequent authentications.
Guest VLAN
This parameter specifies the VID of a Guest VLAN. The authenticator
port is a member of a Guest VLAN when no supplicant is logged on.
Clients do not log on to access a Guest VLAN. You can specify a
Guest VLAN by either its name or VID. To remove a Guest VLAN
without assigning a new one, delete the name or VID of the assigned
VLAN.
4. Click Apply.
Changes to the authenticator settings are immediately implemented on
a port.
5. To permanently save the changes, select the Save Config menu
selection.