Allied Telesis AT-S62 - Manual (Page 263)

AT-S62 Management Software Web Browser Interface User’s Guide
Section III: SNMPv3 263
Displaying
SecurityToGroup
Table Entries
To display entries in the SNMPv3 SecurityToGroup Table, perform the
following procedure.
1. From the Home Page, select Monitoring.
2. Select the Mgmt Protocols menu selection.
3. Select the SNMP Tab.
4. From the SNMP Monitoring Tab, click the circle next to the View
SecurityToGroup Table.
5. Click View at the bottom of the page.
The Monitoring, SNMPv3 SecurityToGroup Table Page is shown in
Figure 86.
Figure 86. Monitoring, SNMPv3 SecurityToGroup Table Page