Avery Dennison 9840 Technical Reference Manual - Manual (Page 89)

MonarchNet for NetWare 5-7
Selected
Queues This area displays a list of file servers and queues
currently assigned to the output port selected in the Port
Number field. If the port number selected was All, the
Selected Queues field displays a list of all queues
assigned to all Monarch output ports. The port number
appears to the left of each queue name. To remove the
assignment of a queue, select the queue you wish to
remove from the Selected Queues list and then select ok.
Output
Port Select Output Port to specify the port on the Monarch
device to which you want to assign the selected print
queue.
NOTE: Print jobs can be distributed to multiple printers on
selected queues by selecting the same queue
multiple times and selecting a different output port
for each queue entry.
C o n f i g u r i n g N e t W a r e P o r t O p t i o n s
The following options are used to configure ports that are using the NetWare
protocol.
OK and Cancel affect the entire dialog box, not just the
NetWare Port tab options. Do not choose OK until you've
entered all changes on this tab and other tabs. If you
choose Cancel, you lose all changes in every tab of this
dialog box.
Port
Number Select the port number you wish to configure.