Avery Dennison 9840 Technical Reference Manual - Manual (Page 38)

1-24 MonarchNet for TCP/IP
R e s e t t i n g / R e s t o r i n g t h e P r i n t S e r v e r
Reset This option allows you to restart the print server. To reset
the print server, select the Reset option from the Print
Server menu, and then select Reset.
Make sure there are no print jobs active when you reset
the print server. All protocols will be restarted. If you
attempt a reset while a job is printing, the job may not
print successfully.
Restore
Factory
Default
Settings This option allows you to restore the print server's default
settings. To restore settings, select the Reset option from
the Print Server menu, and choose one or more of the
options described below.
Output
Ports Restores settings related to output ports such as port name
and output type.
TCP/IP Restores settings specific to the TCP/IP protocol
configuration such as the IP address and subnet mask.
NetWare Restores settings specific to the NetWare protocol
configuration such as the mode and default file server.
Once you have marked the desired options, select Restore.
To completely restore the print server to factory default settings, select all
items in the list.
CAUTION
Make sure there are no active print jobs when you select
Restore Factory Defaults. If you restore the print server
while a job is printing, the job may not print successfully.