Avery Dennison 9840 Technical Reference Manual - Manual (Page 156)

8-2 Print Server Configuration Using Telnet
M o n a r c h N e t C o n f i g u r a t i o n U t i l i t y
Printing a
Configuration
Page This option allows you to print a configuration page. The
configuration page provides current network and printer
information.
Showing
Network/Printe
r Information This option displays current network and printer
information.
Showing Port
Information This option allows you to view current port configuration
information for the MonarchNet printer port.
S p e c i f y i n g P r i n t S e r v e r I P A d d r e s s
This option allows you to select the method the MonarchNet uses to obtain
its IP address or to set a permanent IP address. If the MonarchNet has been
configured to use a permanent IP address, a DHCP, RARP or BOOTP server
does not need to be available when the MonarchNet is powered on.
If you change the IP address, the change will remain undetected until the
MonarchNet is reset or is powered off and on.
Remember, when choosing a permanent IP address:
♦ The IP address must follow the format XXX.XXX.XXX.XXX, where each
XXX is a number between 0 and 255.
♦ If you select an invalid IP address you may not be able to access the
MonarchNet.
♦ You can also use MonarchNet for TCP/IP, or MonarchNet for NetWare to
set a permanent IP address.
If you select an invalid IP address you may not be able to
access the MonarchNet. Use this option with care!
S p e c i f y i n g t h e S u b n e t M a s k f o r Y o u r N e t w o r k
If your network environment includes subnets, you will want to set the subnet
mask.
The subnet mask must follow the format XXX.XXX.XXX.XXX, where each
XXX is a number between 0 and 255.