Avery Dennison 9840 Technical Reference Manual - Manual (Page 21)

MonarchNet for TCP/IP 1-7
Selecting PSERVER or RPRINTER/NPRINTER Mode
You can configure the print server to operate in PSERVER or
RPRINTER/NPRINTER mode. In PSERVER mode, the Monarch print server
operates as the NetWare print server. It services specified queues on
specified file servers. In PSERVER mode the Monarch print server can
simultaneously access up to eight different file servers and 32 print queues.
In RPRINTER/NPRINTER mode, the Monarch print server acts as a printer
connection for the NetWare Print Server NLM (EXE or VAP). The NetWare
Print Server NLM (or VAP) runs on the file server. The NetWare Print Server
EXE runs on a dedicated PC. In RPRINTER/NPRINTER mode, the Monarch
print server can only service one file server.
Configuring for PSERVER Mode
Bindery Settings
Default File
Server Select a default file server. The default file server can
be selected from any file server listed in the Default
File Server scroll menu. The default file server must
be active at power up for the Monarch print server to
get its configuration.
Print Server
Name Enter a name for the print server. The print server
uses this name to login to the file server. Select
Password to enter the password the print server
should use to log into the file server.
NDS Settings
(NDS Products
Only) NDS settings must first be created and setup using
Novell's NWAdmin or PConsole utility. In a Directory
tree, create a Print Server object and one Printer
object for each output port. For example, "Printer 1"
goes to Port 1, "Printer 2" goes to Port 2. Attach NDS
print queues to the NDS Printer objects.
Preferred File
Server This is the file server on which the Print Server object
was created.
Preferred Tree This is the Directory tree in which the Print Server
object was created.