Avery Dennison 9840 Technical Reference Manual - Manual (Page 25)

MonarchNet for TCP/IP 1-11
Postscript Font
Queue (only
available when
font download is
enabled) This field displays the name of the queue in which you
wish to place your Postscript fonts and macros. You
can also create a new queue or select an existing
queue from a list of available queues.
NOTE: To place files in your font queues, use the
NetWare NPRINT or CAPTURE commands.
The contents of these special font queues are
not deleted after being sent to the printer.
Forms Checking Select this option to enable form checking. Form
checking works with NetWare Print Forms. If the form
number assigned to a print job matches the form
number in the printer, the job will print normally. If the
form number is different, printing will stop and the
message "Print Server needs a form change. Mount
form # " will be sent to the user. The print server will
wait for the user to indicate that the form has been
changed at the printer.
Form Number Enter the form number in the printer.
Notify Select this option to allow users to receive status
messages about their print jobs. In
RPRINTER/NPRINTER mode, notification is managed
by the NetWare print server NLM.
RPRINTER/NPRINTER Mode Settings
Printer Number Enter a printer number (0 - 15) for the port. NetWare 4.X
supports printer numbers 0 - 254.