Avery Dennison 9840 Technical Reference Manual - Manual (Page 109)

MonarchNet for NetWare 5-27
A d d A c c e s s E n t r y
Access to print server configuration and diagnostic information is determined
by using community names. The Special Options window is used to
permanently define access information so that it does not need to be entered
each time the print server is accessed. To get and/or set information on a
print server through MonarchNet for NetWare, community names used by the
utility must match community names assigned to the print server.
To configure MonarchNet for NetWare to use the correct community names,
enter the serial number or network number followed by a dash (-) of the print
server (or group of print servers) you wish to access. Use an asterisk (*) as
a wildcard to specify multiple devices. For example, to add a single print
server enter 1679128, to add a group of print servers enter a 167*. To add a
group of print servers by entering a network number, enter D4-.
A d v a n c e d N e t W a r e C o n f i g u r a t i o n
The following options are used to configure the print server's advanced
NetWare-specific settings for your environment.
Frame
Format By default, the frame format is automatically sensed
each time the print server is powered on. If the print
server is not communicating with the file server or the
MonarchNet for NetWare utility due to a frame format
mismatch, select a different frame format from the list.
Queue
Scan Time
(PSERVER
Mode Only) Queue scan time (given in tenths of seconds) indicates
how often the print server will go out and look for print
jobs in a print queue. You may enter a value from 1-255
tenths of a second. For example, a queue scan time of
80 will cause the print server to look for print jobs in the
queue every 8 seconds. The default queue scan time is
40.
HP
JetAdmin
Support HP JetAdmin Support allows status from the Monarch
device to display in Hewlett Packard's HP JetAdmin
utility.
IPX/SPX
Direct
Printing Enables IPX/SPX peer-to-peer printing via the
MonarchNet Connect for IPX/SPX utility.