Avery Dennison 9840 Technical Reference Manual - Manual (Page 65)

NetworkAlert 32 2-11
Event Filtering
Events are grouped into the Generic and Print Server categories. Click the
checkbox next to the event to either log or display the event depending on
your configuration mode. Use the buttons on the right side of the dialog to
quickly select and deselect events.
Select Event
Category Select from Generic and Print Server event categories.
Select All Selects all the events in the current category.
Select Urgent Selects all the urgent events in the current category.
Select Warning Selects all the warning events in the current category.
Select
Informational Selects all the informational events in the current
category.
Deselect All Deselects all the events in the current category.
For more information about specific events, see “Generic Events” or “Print
Server Events.”
Generic Events
The following events are typically reported by SNMP print servers:
Warning Events
Cold Start The device's power has been turned on.
Authentication
Failure A SNMP communication was attempted with an invalid
community name.
Print Server Events
The following events are generated by the print server:
Informational Events
Printer On-Line The printer attached to the port is on line.
Printer Off-Line The printer attached to the port is off line
No Printer
Attached No printer is attached to the port.