Avery Dennison 9840 Technical Reference Manual - Manual (Page 142)

7-24 MonarchNet for NDS
CAUTION
If you enter an invalid default gateway or the default
gateway becomes unavailable, the Monarch device may
not be able to communicate with non-local networks.
SNMP
Get Community Name allows assignment of the community name required to
get information from the Monarch device. The default community name is
public.
Set Community Name allows assignment of the community name required to
set information on the Monarch device. The default community name is
public.
Trap Community allows assignment of the community name that will be used
when traps are sent from the Monarch device.
Trap Destination allows assignment of an IP address to which traps will be
sent. The IP address must follow the format XXX.XXX.XXX.XXX, where each
XXX is a number between 0 and 255. To broadcast traps to all hosts on the
local network, enter 255.255.255.255.
Restore TCP/IP Defaults allows the TCP/IP settings on this page to be set
back to the factory default settings. If you have insufficient rights to modify
the Monarch Print Server object properties, the Restore TCP/IP Defaults
button will not be available.
CAUTION
Make sure there are no print jobs active when you select
Restore TCP/IP Defaults. If you restore the device while
a job is printing, the job may not print successfully.
OK saves changes to the TCP/IP configuration.
Cancel closes this dialog without saving changes to the TCP/IP
configuration.