Avery Dennison 9840 Technical Reference Manual - Manual (Page 24)

1-10 MonarchNet for TCP/IP
Output Port Select Output Port to specify the port on the Monarch
device to which you want to assign the selected print
queue.
NOTE: Print jobs can be distributed to multiple printers
on selected queues by selecting the same
queue multiple times and selecting a different
output port for each queue entry.
C o n f i g u r i n g N e t W a r e P o r t O p t i o n s
The following options are used to configure ports that are using the NetWare
protocol.
OK and Cancel affect the entire dialog box, not just the
NetWare Port tab options. Do not choose OK until you've
entered all changes on this tab and other tabs. If you
choose Cancel, you lose all changes in every tab of this
dialog box.
Port Number Select the port number you wish to configure.
PSERVER Mode Settings
Font Download Font downloading allows the print server to ensure that
the appropriate fonts are available for each print job.
Select this option to enable font downloading.
PCL Font
Queue (only
available when
font download is
enabled) This field displays the name of the queue in which you
wish to place your PCL fonts and macros. You can also
create a new queue or select an existing queue from a
list of available queues.