Avery Dennison 9840 Technical Reference Manual - Manual (Page 184)

10-2 Advanced Management Features
6. Click the Queues icon from the left column to bring up the Queues
screen and then click the Change button.
7. Select the desired queues from the list of Available Queues to be added
into service. Click the Service button to move the selection to the
Serviced Queues column. When all queues have been added, click OK.
8. Click OK again to return to the main screen.
WARNING
Do not use both MonarchNet and JetAdmin to change
NetWare configuration settings as unexpected results
may occur.
TCP/IP Configuration
1. From the main JetAdmin screen, select the MonarchNet port you wish to
configure.
2. Select Modify from the Device menu.
3. On the Configuration screen, select the General tab and enter the print
server name and description.
4. Select the TCP/IP tab and set the print server IP configuration.
AppleTalk Configuration
1. From the main JetAdmin screen, select the MonarchNet port you wish to
configure.
2. Select Modify from the Device menu.
3. Under the Optional tab, select Mac.
4. Enter the AppleTalk name and click OK.