Avery Dennison 9840 Technical Reference Manual - Manual (Page 169)

Windows Printer Setup 9-5
2. Double-click the Network icon.
3. Select the Protocols tab.
4. Select TCP/IP Protocol and click the Properties button.
5. Assign the server an IP address (for LANs without Internet access, it is
suggested to use 10.10.10.1). Click OK.
Install LPR Print Monitor
1. Open the Windows NT Control Panel.
2. Select the Services tab.
3. Select Add, then Microsoft TCP/IP printing.
4. Click the Close button.
5. Restart the system.
Assign Print Server IP Address
Using MonarchNet for IP, assign the print server an IP address; for example,
10.10.10.2.
Add LPR Printer
1. Open the Control Panel, Printers and then select Add Printer.
2. Select My Computer and click Next.
3. Click the Add Port button.
4. On the Printer Ports screen, select LPR Port from the list of Available
Printer Ports and click the New Port button.
5. In the Name or address of server providing lpd: field, enter the IP
address you assigned to the print server.