Avery Dennison 9840 Technical Reference Manual - Manual (Page 68)

2-14 NetworkAlert 32
Filtering Events
To filter events complete the following steps:
1. For log filtering select the Log Settings... item from the File menu or for
view filtering select the Filter Settings... item from the view menu.
2. Select the device filter page to change device filtering or select the event
filter page to change specific event filtering.
Viewing Filter Settings
The view filter allows you to control which events are displayed. When an
event is received it is placed inside the NetworkAlert 32 event cache.
Depending on your view settings the event will be displayed in the view. The
view settings are independent of the log settings. For example, you can
decide to view an event while not logging it.
To get specific help on the view settings use the help button on each of the
view setting's property pages.
M o n a r c h N e t f o r T C P / I P
The MonarchNet™ for TCP/IP application allows you to manage your print
server. The application is used to configure and query the status of the print
server.
T r o u b l e s h o o t i n g
The following are some possible problems users could encounter with
NetworkAlert 32.
Problem Solution
No devices are displayed in the
Available Devices list box on the
device filter property page. 1. Press the Search Network button
to scan the local network.
2. If the device is not found, you
can add it directly using the
Add/Update Device... button.