Avery Dennison 9840 Technical Reference Manual - Manual (Page 190)

10-8 Advanced Management Features
A Request Results page will appear indicating one of the following:
♦ Configuration Successfully Set: The values have been
successfully saved to the print server. Go to another page to
continue configuration or exit the browser.
♦ Invalid Input: Some or all input fields contain invalid
information. None of the values have been saved to the print
server. The Request Results page will list all fields that
contain errors along with a description of the problem.
Selecting the Back button on your browser will generally
redisplay the page you just submitted and allow the values to
be edited. Selecting the Reload link on the Request Results
page will produce a new entry page from the server so you
can start over.
♦ Configuration Successfully Set. Reset Required: The values
have been successfully saved, but the print server must be
reset for the desired values to take effect. Reset the server
immediately or wait until all configuration is complete before
resetting. If you do not reset immediately, a link will appear
at the top of all subsequent configuration pages reminding
you to reset the server.
Web Admin Configuration
Under the Configuration menu, select the Admin(Web) link.
The following values are currently only configurable
through the Web browser interface.
♦ Admin Name - The name used to access full configuration privileges. The
default Admin Name is admin.
♦ Admin Password - This field is used to specify the Admin Password
used to access full configuration privileges. This field will accommodate
up to 24 characters. The default Admin Password is MonarchNet.
The Admin Password is also used as the Telnet
password.
♦ Confirm Admin Password - This field is used to confirm the Admin
Password entry by entering a second time.