Avery Dennison 9840 Technical Reference Manual - Manual (Page 185)

Advanced Management Features 10-3
Obtaining Diagnostic Information Using JetAdmin
1. From the main JetAdmin screen, select the MonarchNet port on which
you wish to view diagnostic information.
2. Select Properties from the Device menu.
3. From the Properties screen, select the appropriate tab to view the
desired diagnostic information.
For JetAdmin to function correctly with the MonarchNet,
the SNMP Get community name in JetAdmin must be set
to public.
H P W e b J e t A d m i n S u p p o r t
This section lists the software requirements, configuration information and
installation for Windows NT or NetWare, and obtaining diagnostic information
using HP JetAdmin.
Software Requirements
♦ Web JetAdmin
♦ Web JetAdmin Compatible Browser
For more information on installing and using HP Web
JetAdmin, refer to the HP Web JetAdmin documentation.
Configuring the MonarchNet Using Web JetAdmin
1. From the main Web JetAdmin page, select the MonarchNet port you wish
to configure.
2. On the Properties page, click the Config button.
3. Make any necessary changes to the options listed and click the
corresponding Apply button.