Avery Dennison 9840 Technical Reference Manual - Manual (Page 171)

Windows Printer Setup 9-7
3. From the Welcome to Monarch screen, select the MonarchNet Connect
Windows Printing and click Next>.
You may need to install the TCP/IP Management Utilities if you have not
already done so.
4. From the Setup screen, select MonarchNet Connect for TCP/IP
(Windows NT) and click Install.
5. The selected component installs. You can click
additional components or click Done to exit.
6. From the Windows NT Print Manager Printer menu select Create Printer.
7. In the Create Printer window select:
Printer Name
Driver
Description
8. At the Print prompt, select Other.
9. From the Print Destinations window, select Monarch MonarchNet
Connect for IP.
10. If the port you wish to add is listed in the Ports available on local subnet:
window, select the port name and click Add.
If MonarchNet is not listed, verify the software has been
properly installed.
You will enter into the Add MonarchNet Port screen where there will be a list
of all MonarchNet print servers discovered on the network.
♦ The TCP/IP monitor will search only the local subnet.
♦ The IPX/SPX monitor will retrieve all devices found in the NetWare
bindery.
♦ The DLC monitor will search only the local subnet.