Avery Dennison Monarch 9860 Quick Reference - Manual

Q U I C K R E F E R E N C E
This Quick Reference contains supply loading and general
care and maintenance procedures for the Monarch
 9860
printer. For more detailed information, refer to the Operator’s
Handbook available on our Web site (
www.monarch.com ).
Note: Information in this document supercedes information
in previous versions. Check our Web site for the
latest documentation and release information.
C o n n e c t i n g t h e C a b l e s
The power supply automatically switches between 115V or
230V. There are no operator settings required.
1. Plug the power cable into the socket. Plug the other end
of the cable into a grounded electrical outlet.
2. Connect the communication cable into the appropriate
port. Secure the cable with the connecting screws (serial)
or spring clips (parallel).
If you are communicating with the host through the serial
port, make sure the printer's communication values match
those at the host. The factory default values are 9600
Baud, 8 bit data frame, 1 stop bit, no
parity, and DTR flow control. Set the
communication values on the printer to
match those at the host.
The printer also has a USB (Universal
Serial Bus) version 2.0 communications
port, which is compatible with version
1.1. Drivers are available on our Web
site for a variety of operating systems.
These drivers provide a Virtual
Communications Port (VCP), which
looks like a normal serial port (for
example, COM1-4).
After installing
the drivers, change the
communications port to
the one allocated by the
VCP driver.
Parallel Port
USB Port
Serial Port
3. Turn on the printer. Press ( I ) to turn
on and ( O ) to turn off the printer.
Pow er Cable
Goes Here
Monarch  and 9860 are registered trademarks of Avery
Dennison Retail Information Services LLC. Avery
Dennison
 is a trademark of Avery Dennison Corp.
TC9860QR Rev. AE 11/09 2003 Avery Dennison Corp. All rights reserved.