Avery Dennison 9840 Technical Reference Manual - Manual (Page 88)

5-6 MonarchNet for NetWare
Server
Name or VAP) that will be servicing remote printers.
Advanced Select Advanced to open a dialog that allows
configuration of advanced NetWare-specific settings.
See Configuring a Print Server for other configuration
options.
C o n f i g u r i n g N e t W a r e Q u e u e s O p t i o n s
The following options are used to select or create NetWare bindery print
queues that will be used in printing to the Monarch device from the NetWare
bindery environment.
NetWare Queue Load Balancing
Print jobs can be distributed to multiple printers on selected queues by
selecting the same queue multiple times and selecting a different output port
for each queue entry.
OK and Cancel affect the entire dialog box, not just the
NetWare Queues tab options. Do not choose OK until
you've entered all changes on this tab and other tabs. If
you choose Cancel, you lose all changes in every tab of
this dialog box.
Port
Number Select the Monarch printer server port number for which
you wish to assign print queues. Select All to assign print
queues for all output ports at the same time.
Available
Queues A list of available file servers is displayed in this field.
Select the + symbol to the left of the file server icon to
display a list of queues available on that file server. Select
the queue you wish to assign to the selected port and then
select right arrow to add the queue to the list of Selected
Queues.
Create Select Create to create a new NetWare print queue. A
dialog box will appear prompting for the queue name and
the name of the file server the queue should be created
on.
Delete Select Delete to delete the selected print queue in the
Available Queues field from the file server.