Avery Dennison 9840 Technical Reference Manual - Manual (Page 17)

MonarchNet for TCP/IP 1-3
Installing a new print server using MonarchNet for TCP/IP requires three
steps:
1. Connect the print server to the network.
Connect the network cable to the print server. Make sure the print server
is on the same local network as the workstation that is running this
utility.
2. Select the print server from the list.
Run MonarchNet for TCP/IP by selecting MonarchNet for TCP/IP from
the Monarch Printing group. Select the print server from the list. By
default, the All Print Servers view is selected and all print servers
attached to the subnet of the network from which the MonarchNet utility
is running are listed.
If the print server is not in the list, select the Unconfigured Print
Servers view. If MonarchNet for TCP/IP was already running before
the print server was installed, select the Refresh option from the
View menu.