Avery Dennison 9840 Technical Reference Manual - Manual (Page 87)

MonarchNet for NetWare 5-5
Only) goes to Port 1, "Printer 2" goes to Port 2. Attach NDS
print queues to the NDS Printer objects.
Preferred
File
Server This is the file server on which the Print Server object
was created.
Preferred
Tree This is the Directory tree in which the Print Server
object was created.
Print
Server
Name The fully qualified (canonicalized) name of the Print
Server object created (i.e.
CN=MMS167892.OU=Marketing.O=Monarch). The
Monarch print server device uses this name to login to
the Directory tree specified above. Select Password
to enter the password the print server should use to
log into the Directory tree.
NOTE: You must have administrative rights to the
Directory tree to modify these settings. If
these settings are disabled and you have
administrative rights, the utility may be having
difficulty loading the unicode tables. Add the
directory of your unicode tables to your search
path. After any change to the servicing of
queues for the print server from NWAdmin (or
PConsole), the print server must be reset via
MonarchNet for NetWare.
Password Select Password to open a dialog that allows a password
for the print server to be entered. This password is used
to log into the file server or Directory tree. A password
may be up to 9 characters long. The same password is
used for Bindery and NDS environments.
Advanced Select Advanced to open a dialog that allows
configuration of advanced NetWare-specific settings.
Configuring for RPRINTER/NPRINTER Mode
Default
File
Server Enter the file server associated with the PSERVER.NLM,
PSERVER.EXE, or PSERVER.VAP.
Print Enter the name of the NetWare print server (NLM, EXE,