Avery Dennison 9840 Technical Reference Manual - Manual (Page 192)

10-10 Advanced Management Features
Reset Reset the print server by selecting the Reset link under
the Reset menu. A message will appear asking you to
confirm the reset.
Restore Select Restore Defaults under the Reset menu to
restore selected protocols to factory defaults. Select the
individual protocols to be restored and then select the
Restore Selected Protocols button. All protocols can
be restored simultaneously by selecting the Restore All
Protocols button
Server Connection
The print server only supports two simultaneous HTTP connections. If your
browser fails to connect to the print server, the browser may be trying to
open more than two connections. Please refer to your browser’s Help files
for information on changing the connection settings. Both Netscape
Navigator and Microsoft Explorer for the Macintosh and Power PC will
sometimes display a failure to connect message after being configured for
only two connections. Should this occur, select OK to bypass the error
message. The menu page will still be displayed and configuration can be
completed.
Quickly refreshing a page within some browsers can cause the browser to
leave active connections open with the server called a hung connection. This
will use up one of the HTTP connections, can cause problems connecting to
the server and will slow down Web response time. If TCP Connection
Timeout Checking is enabled under TCP/IP configuration, the hung
connection will timeout after the timeout period has expired.
Login If you forget the administrator password, restoring the
TCP/IP protocol to factory defaults from any other
configuration utility restores the Web admin name and
password to default values.
Configuration Web browsers will generally cache previously viewed Web
pages on the local machine. To view the most current print
server information, it is a good idea to select the Reload or
Refresh buttons on your browser instead of using the Back
button.