Avery Dennison 9840 Technical Reference Manual - Manual (Page 22)

1-8 MonarchNet for TCP/IP
Print Server
Name This is the fully qualified (canonicalized) name of the Print
Server object created (i.e.
CN=MMS167892.OU=Marketing.O=Monarch). The
Monarch print server device uses this name to login to
the Directory tree specified above. Select Password to
enter the password the print server should use to log into
the Directory tree.
NOTE: You must have administrative rights to the
Directory tree to modify these settings. If these
settings are disabled and you have administrative
rights, the utility may be having difficulty loading
the unicode tables. Add the directory of your
unicode tables to your search path.
After any change to the servicing of queues for
the print server from NWAdmin or Pconsole, the
print server must be reset via MonarchNet for
NetWare.
Password Select Password to open a dialog that allows a password
for the print server to be entered. This password is used
to log into the file server or Directory tree. A password
may be up to 9 characters long. The same password is
used for Bindery and NDS environments.
Advanced Select Advanced to open a dialog that allows configuration
of advanced NetWare-specific settings.
Configuring for RPRINTER/NPRINTER Mode
Default File
Server Enter the file server associated with the PSERVER.NLM,
PSERVER.EXE, or PSERVER.VAP.
Print Server
Name Enter the name of the NetWare print server (NLM, EXE, or
VAP) that will be servicing remote printers.
Advanced Select Advanced to open a dialog that allows configuration
of advanced NetWare-specific settings.