Avery Dennison 9840 Technical Reference Manual - Manual (Page 28)

1-14 MonarchNet for TCP/IP
System
Name Enter the name of your choice. This name will identify your
print server.
System
Contact Enter any information that will be useful to a user if problems
arise with the print server.
System
Location Enter a description of the location of the print server.
Get
Community
Name This field is used to set the community name required to get
information from the print server. The default community
name is public . For the Monarch print server status
information to display correctly in HP's JetAdmin utility, the
Get Community Name must be set to public.
Set
Community
Name This field is used to set the community name required to set
information on the print server. The default community name
is public.
Trap
Community
Name Enter the community name that will be used when traps are
sent from the print server. This setting allows trap utilities to
only accept traps from devices with appropriate community
names.
E n a b l i n g a n d D i s a b l i n g P r o t o c o l s
Select the box in front of each protocol that you wish to enable. If you disable
a protocol, the print server will no longer communicate with that protocol until
it is re-enabled.
OK and Cancel affect the entire dialog box, not just the
Protocols tab options. Do not choose OK until you've
entered all changes on this tab and other tabs. If you
choose Cancel, you lose all changes in every tab of this
dialog box.