Avery Dennison 9840 Technical Reference Manual - Manual (Page 103)

MonarchNet for NetWare 5-21
S p e c i a l O p t i o n s
Access to print server configuration and diagnostic information is determined
by using community names. The Special Options window is used to
permanently define access information so that it does not need to be entered
each time the print server is accessed. To get and/or set information on a
print server through MonarchNet for NetWare, community names used by the
utility must match community names assigned to the print server.
To configure MonarchNet for NetWare to use the correct community names,
enter the IP Address of each print server (or group of print servers) you wish
to access, and then enter the community names necessary to access them.
Serial/Network
Numbers This field displays the serial number or network number
of each print server for which MonarchNet for NetWare
has been defined access. To add a new print server (or
group) serial/network number to this list select Add.
Get Community
Name Enter the Get community name necessary to access the
print server or group of print servers selected.
Set Community
Name Enter the Set community name necessary to access the
print server or group of print servers selected.
Add Button Select Add to define access to a new print server or a
group of print servers.
Delete Button Select Delete to delete a print server entry in the
Serial/Network Numbers list.