Lab.gruppen PLM 20K44 - Manual (Page 98)

Lake Controller Operation Manual Rev 1.5.4
EQ/Levels Menu Reference
93
▸ LOW OUTPUT HPF SETs the HPF to affect only the lowest output channel of the selected Module.
Applicable to Contour Modules only.
▸ HPF ENABLE enables/disables the HPF for the selected Module.
▸ LPF ENABLE enables/disables the LPF on the highest output channel for the selected Module.
INPUT HPF and LOW OUTPUT HPF are disabled for
the Linear Phase Brick Wall 4-Way Module. The
LP4way HPF is fixed to INPUT HPF. Other Module
types, incl. LP2/LP3way provide the HPF option.
6.4.4.2 Crossover Hide
Available only in Designer Mode. When enabled (orange), the crossover page will be hidden when the
Module is locked, or after exiting from Designer Mode.
6.4.4.3 Crossover View Only
Available only in Designer Mode. When enabled (orange), the crossover page will be set as view only when
the Module is locked, or after exiting from Designer Mode.
6.4.4.4 EQ Preferences
This provides a submenu containing options regarding the view of the EQ scale.
6.4.4.5 Crossover Copy
Copies all crossover and EQ settings from the selected XOVER or HPF/LPF page.
6.4.4.6 Crossover Paste
Active only when a crossover or HPF/LPF page has previously been copied and the current Module is the
same type.
A crossover can only be pasted to a Module of the same number of channels and the same type. For
example, a Classic 3-Way crossover can only be pasted into another Classic 3-Way crossover; the HPF/
LPF of a Mesa EQ Module can only be pasted onto another Mesa EQ HPF/LPF page; and a Classic 4-Way
crossover cannot be pasted into a Linear Phase Brick Wall 4-Way.