Lab.gruppen PLM 20K44 - Manual (Page 203)

198
Lake Controller Operation Manual Rev 1.5.4
Communication and Synchronization
2. Tap YES on the warning message to confirm the action.
Audio will not change if this option is selected
16.3.5 Synchronizing the Lake Controller and Devices
In the following example, a communication error occurred while the PEQ1 overlay was being updated using
the Controller. Figure 15 2 shows an example of the COMPUTER SETTINGS view, along with letters mark-
ing key information.
Figure 16-4: Computer Settings on the PEQ1
The referenced information in Figure 16-4 is described below.