Lab.gruppen PLM 20K44 - Manual (Page 113)

108
Lake Controller Operation Manual Rev 1.5.4
System Store Recall Menu Reference
7. System Store Recall Menu Reference
The Lake Controller allows the user to store and recall complete system configurations. This enables the
same Lake device to be used in entirely different situations, as their complex configurations can be changed
in seconds.
7.1 System Store Recall Navigation
From the HOME menu, tap SYSTEM STORE/RECALL. The button bar displays the following options, and a
scroll bar also appears containing files and folders.
Figure 7-1: System Store Recall Scroll Bar
The first icon on the system scroll bar is labeled **My Computer**. Selecting this and tapping OPEN will
allow you to navigate to folders and files on your hard drive or any removable disk.
The other files shown at the root of this directory are the system configuration files stored from within the
Controller software.
If there are many folders or files, drag the scroll bar to the left or right, or tap the << or >> buttons. Most
options on the button bar appear gray and are inactive until a folder or file is selected on the scroll bar.
7.2 Shortcut to Data/User Folder
Default software installation of the Lake Controller places a shortcut in the Windows Start menu:
START > PROGRAMS > LAKE CONTROLLER > USER DATA FILES
System files, Module files and LoadLibrary files are
located in the My Documents\Lake\Lake Controller
6.x\
Historical files created in versions prior to Lake
Controller v6.3 can be located as described below
and copied over during migration if required.
For Windows XP, pre Lake Controller v6.3, user files were located at C:\Program Files\Lake\Lake Controller
vX.X\data\user.
For Windows 7, pre Lake Controller v6.3, user files were located at C:\User\”username”\AppData\Local\
VirtualStore\Program Files\Lake\Lake Controller vX.X\data\user.