S 21.3.7 f, Lm series reference and operation 273 – Lab.gruppen PLM 20K44 User Manual
Page 278
Lake Controller Operation Manual Rev 1.5.4
LM Series Reference and Operation
273
21.3.6 Global Dante Transmit Enabled Control
Two buttons, ON and OFF, control the Dante Transmit Enabled status of all devices (except MY8-LAKE) that
are online and present in the current system configuration. A confirmation is required prior to changing this
status across all devices.
Both buttons will be blue if a combination of status are present, or one button will be orange if all devices
have the same status.
The layout and functionality of this screen is
designed for compatibility with mixed systems
containing both LM Series devices and Lake-
enabled amplifiers.
21.3.7 Events Tab
Figure 21-8: Events Tab
The EVENTS tab provides an Event Log listing warnings, faults, and user actions that have occurred on the
network since the Lake Controller software was started. In addition, it contains events that can be read from
the internal log of the device covering four hours prior to starting the Lake Controller. Various filter options
are available for displaying a user-definable subset of the log.
▸
Module View filters the results to show events that apply to the selected Module.