Lab.gruppen PLM 20K44 - Manual (Page 109)

104
Lake Controller Operation Manual Rev 1.5.4
EQ/Levels Menu Reference
Figure 6-21: Aux Output with HPF and LPF Enabled
To adjust the slope of these filters:
1. Tap FILTER SELECT
A scroll bar appears displaying available HPF/LPF types.
2. Drag the scroll bar or use the << and >> buttons to view available filters.
3. Select the 24dB LINKWITZ/RILEY filter from the scroll bar.
4. Tap FILTER SET to activate this filter, then YES to the warning message.
Figure 6-22: Selecting a new filter slope for HPF or LPF
To protect loudspeaker drivers, the audio output for
the affected channel is muted momentarily while
the settings are changed.