Keyboard shortcuts 285 – Lab.gruppen PLM 20K44 User Manual
Page 290
Lake Controller Operation Manual Rev 1.5.4
Keyboard Shortcuts
285
▸
[SHIFT] or [CAPS LOCK] + DOWN ARROW: Decreases the gain of the selected PEQ filter (Coarse).
▸
[Q]: Increases bandwidth of selected filter, or the lowest frequency segment of a Mesa filter (Fine).
▸
[SHIFT] or [CAPS LOCK] + [Q]: Increases bandwidth of selected filter, or the lowest frequency segment
of a Mesa filter (Coarse).
▸
[W]: Decreases bandwidth of selected filter, or the lowest frequency segment of a Mesa filter (Fine).
▸
[SHIFT] or [CAPS LOCK] + [W]: Decreases bandwidth of selected filter, or the lowest frequency seg-
ment of a Mesa filter (Coarse).
▸
[A]: Increases the high bandwidth of a selected Mesa filter (Fine).
▸
[SHIFT] or [CAPS LOCK] + [A]: Increases the high bandwidth of a selected Mesa filter (Coarse).
▸
[S]: Decreases the high bandwidth of a selected Mesa filter (Fine).
▸
[SHIFT] or [CAPS LOCK] + [S]: Decreases the high bandwidth of a selected Mesa filter (Coarse).
▸
[CTRL] + [Q]: Moves the low-frequency segment of a Mesa filter to the left.
▸
[CTRL] + [W]: Moves the low-frequency segment of a Mesa filter to the right.
▸
[CTRL] + [A]: Moves the high-frequency segment of a Mesa filter to the left.
▸
[CTRL] + [S]: Moves the high-frequency segment of a Mesa filter to the right.
23.4.3 XOVER/AUX Screen Shortcuts
▸
[1]: Adds a low-shelf filter to the selected output at 125 Hz.
▸
[2]: Adds a parametric filter to the selected output at 500 Hz.
▸
[3]: Adds an all-pass filter to the selected output at 1 kHz. Available in Designer Mode only.
▸
[4]: Adds a high-shelf filter to the selected output at 8 kHz.
▸
[G]: The gain value for the selected filter is displayed in the on-screen keyboard for instant editing.
▸
[F]: The frequency value of the selected filter is displayed in the on-screen keyboard for instant editing.
▸
[B]: The bandwidth value of the selected filter is displayed in the on-screen keyboard for instant editing.
▸
[O]: The order of a selected all-pass filter is displayed in the on-screen keyboard for instant editing. Not
applicable to any other filter type and available only in Designer Mode.
▸
[<]: Moves the center frequency of the selected filter to the left (Fine).
▸
[SHIFT] or [CAPS LOCK] + [<]: Moves the center frequency of the selected filter to the left (Coarse).
▸
[>]: Moves the center frequency of the selected filter to the right (Coarse).
▸
[SHIFT] or [CAPS LOCK] + [>]: Moves the center frequency of the selected filter to the right (Fine).