Lab.gruppen PLM 20K44 - Manual (Page 306)

Lake Controller Operation Manual Rev 1.5.4
Preset Manager
301
It is recommended to Exclude Labels on all Presets when transferring
the same Presets or Bank Files to multiple devices. If Exclude Labels is
not set, the device’s Frame Label and Dante device name will change
during Preset Recall to the value present when the Preset was created.
27.4.1 Creating a New Bank File
A new empty bank file is created by tapping NEW BANK [F3]. This button is available only when the
COMPUTER column is selected, column A by default.
After entering a bank file name, either double-tap the bank file in column A, or select the bank file and tap
OPEN [F1]. The empty bank file is shown in column B.
A bank file can also be created by dragging an online Frame (column C) into column A (or vice versa). This
bank file contains all presets from the dragged Frame, and thus may not be empty. An automatic name is
set for that bank file.
Figure 27-6 shows a bank file containing four presets with varying Lock and Exclude Label statuses.
Figure 27-6: Open Bank File in Default Presets Folder