Lab.gruppen PLM 20K44 - Manual (Page 158)

Lake Controller Operation Manual Rev 1.5.4
Modules Menu Reference
153
3. Tap START REPLACE, then tap YES to the confirmation message.
All offline/Virtual Frame data will be transferred to the online Frames.
8.5 Remove
To remove a Module from the current system, tap the Module icon in the work area while in the MODULES
menu then tap REMOVE.
Audio will not be affected unless the Module is assigned to a Group that contains settings that affect the
audio of the Module.
You can also remove a Module by dragging the
Module icon to the Module scroll bar when in the
MODULES menu
No warning is displayed unless the selected
Module is assigned to a Group. In this instance,
removing a Module de-assigns it from all Groups
to which it is currently assigned.
8.6 Module Store/Recall
Tap the MODULE STORE/RECALL button to view a submenu containing functions that recall and store
Module and base configurations, and to store Frame presets. The button bar displays the following options
and a scroll bar with files and folders.
Figure 8-30: Module Store/Recall Menu and Scroll Bar
For detailed information on all of the Module file types supported by the Lake Controller, please refer to
section 4.7.
8.6.1 Recall/Open
This button’s function and label depends on whether a folder or file is selected. It is inactive when neither a
file nor folder is selected, or when a Group icon is selected in the work area.
The button is labeled OPEN when a folder is selected. To open a folder, tap the desired folder icon on the
scroll bar, then tap OPEN.