Lab.gruppen PLM 20K44 - Manual (Page 112)

Lake Controller Operation Manual Rev 1.5.4
EQ/Levels Menu Reference
107
6.5.5.12 Aux Output Exit
Navigate back to the main EQ/Levels menu.
6.5.5.13 Filter Select
When selected (orange), a scroll bar is displayed with available high-pass and low-pass filters. Available only
when a high-pass or low-pass filter is active and selected; not applicable to EQ filters
6.5.5.14 Filter Set
Available only when a high-pass or low-pass filter is selected on the FILTER SELECT scroll bar.
6.5.5.15 HPF Enable
The high-pass filter is disabled when this button is blue, and enabled when orange.
6.5.5.16 LPF Enable
The low-pass filter is disabled when this button is blue, and enabled when orange.
6.5.5.17 Aux Output Copy
Tapping this button copies the settings of the currently selected output.
6.5.5.18 Aux Output Paste
This button is active only after AUX OUTPUT COPY has been used, and will overwrite the selected auxiliary
output with the settings in the copy buffer.
Auxiliary Outputs can be copied and pasted within or between Modules, but the data cannot be pasted on
XOVER, PEQ, or GEQ screens; the destination channel must be an Auxiliary Output.