Lab.gruppen PLM 20K44 - Manual (Page 159)

154
Lake Controller Operation Manual Rev 1.5.4
Modules Menu Reference
Double-tapping a folder or file icon also opens the
folder or file.
The button is labeled RECALL when a file is selected. To recall a Module file, tap the desired file, then tap
RECALL. Confirm the action by tapping YES to the warning message. By default the Output Configuration
screen is displayed to enable confirmation of output routing - this setting can be changed by toggling the
option on the Output Configuration screen.
Figure 8-31: Recalling a Module File
Recalling a Module file overwrites all data currently
stored in the selected Module and removes the
Module from any Groups.
EAW ® Greybox TM file (.gyx) may also be recalled
directly into the Modules of Lake-enabled
amplifiers. Please refer to chapter 9 for further
details.
8.6.2 Store
The STORE button stores over an existing file. This button is active only when a file is selected.
1. Tap an existing file to store over (overwrite).
2. Tap STORE.
3. Confirm the action by tapping the YES button in the warning message.
If the selected file is set to READ ONLY, the STORE
function is gray (inactive).
8.6.3 New Store
The NEW STORE button stores the current Module configuration under a new file name.