Lab.gruppen PLM 20K44 - Manual (Page 222)

Lake Controller Operation Manual Rev 1.5.4
Designer Mode Menu Reference
217
When Designer Mode is active, the label DESIGNER MODE appears before any other help text above the
button bar.
Figure 19-2: Designer Mode Help Text
19.1.2.1 Password Protection of Designer Mode
Each software installation has one Designer Mode password. This password is stored on the host computer
and is relevant for any system configuration.
To password protect Designer Mode, perform the following steps:
1. Tap CHANGE PASSWORD.
2. Enter a password, and tap OK.
3. Confirm the password, and tap OK.
It is important that you record the Designer Mode password in a safe place. Once the password is set, it will
always be required to enter Designer Mode.
If the Designer Mode password is forgotten, please
email [email protected] for details on
password retrieval.
19.1.2.2 Simple Designer Mode System Security
If multiple levels of security are not required for your Lake Controller installation, exiting Designer Mode
activates all security features described in this document without needing to lock or password protect
individual Modules or base configuration files.
19.1.3 Designing and Protecting a Lake Controller System
This section describes how to use Designer Mode to protect your system by developing an example system
with one Lake device. The example includes detailed instructions to define a base configuration, lock
individual Module level settings, and enforce global security