Lab.gruppen PLM 20K44 - Manual (Page 202)

Lake Controller Operation Manual Rev 1.5.4
Communication and Synchronization
197
Figure 16-3: Out of Sync Notifications
▸ (A) The red disc behind the Module icon indicates that the Module is out of sync.
▸ (B) Flashing USE DATA ON PROCESSORS button.
▸ (C) Flashing USE DATA IN COMPUTER button.
▸ (D) A warning message appears that is visible from any screen in the system.
16.3.3 Updating All Devices with Computer Settings
To update all devices with the information stored in the Controller, perform the following steps:
1. From the HOME menu, tap the flashing USE DATA IN COMPUTER button.
2. Tap YES on the warning message to confirm the action.
This option may result in an audible effect, as the
data in the devices will be overwritten with the data
stored in the computer.
16.3.4 Updating the Controller with Device Settings
To update the Lake Controller with the information stored on the devices, perform the following steps:
1. From the HOME menu, tap the flashing USE DATA ON PROCESSORS button.