Lab.gruppen PLM 20K44 - Manual (Page 21)

16
Lake Controller Operation Manual Rev 1.5.4
Network & Firewall Overview
2. Select the appropriate network connection (Local Area Connection or Wireless Network Connection) to
configure, then select “Change settings of this connection” as shown in Figure 3-5.
Figure 3-5: Selecting Wired Network Connection
Although this tutorial uses Local Area Connection as
an example, the principles also apply to Wireless
Network Connection.
3. Select INTERNET PROTOCOL VERSION 4 (TCP/IPV4), and tap the PROPERTIES button.
Figure 3-6: Local Area Connection Properties