Lab.gruppen PLM 20K44 - Manual (Page 268)

Lake Controller Operation Manual Rev 1.5.4
Lake-enabled Amplifier Reference
263
Figure 20-14: Global Control Tab
20.12.1 Global Power Control
Two buttons, ON and STANDBY, control the power status of all Lake-enabled devices (except MY8-LAKE)
that are online and present in the current system configuration. A confirmation is required prior to changing
this status across all devices.
Both buttons will be blue if a combination of status are present, or one button will be orange if all devices
have the same status.
Status indicators to the right of the buttons show the total number of LM and PLM Series devices in the
current system configuration that are ON, in STANDBY or OFFLINE.
20.12.2 Global Power Channel Mute Control
Two buttons, ALL MUTED and ALL UNMUTED, indicate and control the power channel mute status across
all PLM Series devices that are online and present in the current system configuration. A confirmation is
required prior to changing this status across all devices.